DaveC Posted November 8, 2016 Report Share Posted November 8, 2016 Hi all,Just a quick one to rattle your brains.I have been selected by the university to represent them at BUCS for the track event on 19th-20th November. I would like to know what would be the best gearing for racing in an indoor velodrome as I will be racing at the national cycle centre.Many ThanksDave Cunningham Link to comment Share on other sites More sharing options...
TonyS Posted November 14, 2016 Report Share Posted November 14, 2016 Hi DaveWithout knowing how much track racing (or even riding) you've done, it's a difficult question to answer. However, assuming you're using sprint rims and tubs, and you're not yet up to Olympic standard, I would suggest something like 50x15 or 50x16 or 52x16 with 170mm cranks. One of those should give you a decent gear for a range of events, Take spare rings and sprockets so you can change during the day if necessary. Also what size cranks are you normally using? Don't forget even the straights are banked and with long cranks (>170mm) it's possible to catch the outside pedal on the boards!Of course, If you've been riding at Halesowen then you'll know what sort of gearing suits you and can probably ride a bigger gear than you're used to, as the velodrome will be faster.Best of luckTony Link to comment Share on other sites More sharing options...
DaveC Posted November 14, 2016 Author Report Share Posted November 14, 2016 Hi Tony I have decieded to use 48x14 with 165mm cranks.Many Thanks Dave Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.